Casio IT-9000 Series Service Manual page 82

[ Notes on reassembling ]
When replacing the I2-CASE, perform the following procedure.
(1) Stick double-sided tapes (2 places). (SBAT-D-TAPE, CAP-TAPE)
(2) Stick the EXT-SPACER.
CAP-TAPE
(3) SHIELD-TAPE
1. Stick the SHIELD-TAPE by aligning it with the positioning pins.
2. Fold the SHIELD-TAPE along the red dotted lines and stick it along the case surfaces.
3. Stick the GASKETs (2 places).
A
4. Stick double-sided tapes (3 places). (GPS-ANT-TAPE)
GPS-ANT-TAPE
SBAT-D-TAPE
B
GASKETs
– 75 –
EXT-SPACER
A B
IT-9000