Print Item Deletion Transmission; Count Reset Transmission - Hitachi UX Twin-Nozzle Technical Manual

5.3.12 Print item deletion transmission

5.3.12-1 Overview
● The first print item will be left.
● All the print message in the first print item will be deleted.
● The print format of the first print item will be kept.
● The transmission shall be made independently. Do NOT make this transmission with the other data such as
the print format, the print specification or the print message.
5.3.12-2 Text
ESC2 Header 7AH
5.3.12-3 Example of print item deletion transmission
02H 1FH
STX ESC2
Print item deletion
[Transmission results]
Only the first print item will be left and transmitted.
Column 1 Column 2 Column 3
Item 1 Item 3
Item 2 Item 4

5.3.13 Count Reset Transmission

5.3.13-1 Overview
● Count Reset Transmission will change the count value to the preset value (reset value), and simultaneously
reset the ongoing count figures to zero.
● Count Reset Transmission will not be executed unless the reset value is entered to "Reset" on the second
screen of "Count conditions".
Input the reset value in "Reset" on the second screen of "Count conditions", and then send Count Reset
Transmission.
● The transmission shall be made independently. Do NOT make this transmission with the other data such as
the print format, the print specification or the print message.
If an attempt is made to send it together with the other data, a communication error (NAK response)
occurs.
5.3.13-2 Text
ESC2 Header 2CH Classification 41H
5.3.13-3 Example of Count Reset Transmission
02H
STX ESC2
7AH 03H
Header ETX
Item 5
Item 6
Item 7
1FH 2CH
Header 2CH Classification 41H
Column 1
Item 1
41H 03H
ETX
●Transmission Sequences 5-39