Hitachi UX Twin-Nozzle Technical Manual page 121

[If using the waste solution bottle]
●
During ink drainage, hold the waste solution bottle so as not to knock it over.
[If not using the waste solution bottle]
●
During ink drainage, hold the beaker as well as the recovery tube so as not to knock
over the beaker.
(
d) When the predetermined period of time elapses, follow the operation guidance on the
screen and connect the recovery tube to its original position.
Circulation control
Process：Ink replacement
Operation guide
Connect the recovery tube to the main ink tank as before.
When ready, press <Start/Continue>.
*1 Clean the connection part at the tip of the recovery tube well with makeup before
connecting to its original position.
*2 In order to prevent the recovery tube from getting bent, be sure not to tangle it with
any other tube.
Replace the ink cartridge.
3
Circulation control
Process：Ink replacement
Operation guide
Replace Ink cartridge.
When ready, press <Start/Continue>.
CAUTION
[Service ]
Com=0
Drawing
[Service ]
Com=0
Drawing
Proc. status:
2018.07.07 12:45
Ink Drainage
R InkDra.
Ink rep.
Ink refill
2018.07.07 12:45
Ink Drainage
R InkDra.
Ink rep.
Ink refill
Abort
Start/
Continue
●Replacing the ink 6-8