Communication Monitor Function - Hitachi UX Twin-Nozzle Technical Manual

5.6 Communication Monitor Function

● The contents of serial communications between the external device and IJ printer are displayed.
● Up to 3,000 bytes of data can be acquired at a time.
● When you press the Start button, the system erases monitored data and acquires new data.
● When you press the USB output button, the communication description which is displayed on screen
can be output to USB memory.
Comm. monitor
Blue : DLE2,ESC2,DLE,ESC Red : Failed line
No Trans.
1 R
2 S
3 R
4 S
5 R
6 S
7 R
S
8
Detection
(1) Screen display
Trans.
Communication
description
Proc. status
(2) Input keys
Start
Abort
Error detection
Previous list/
Next list
USB output
Back
5-60 ●Communication Monitor Function
[Ready ]
Communication description
05
06
02 10 31 41 42 43 44 45 10 32 31 32 33 34 35 03
06
05
06
02 10 31 41 42 43 44 45 10 32 31 32 33 34 7F 03
15
Disable Enable
Proc. status：Halted
Item
External device → IJ printer
IJ printer
Sended/received data are displayed in hexadecimal notation. Sixteen bytes of
data are displayed per line.
The current status is indicated (monitoring or interrupted).
Item
Starts exercising the line monitor function. Erases the monitored
information.
Aborts the execution of the line monitor function.
This switches over whether the system is to detect error-ridden locations.
● Disable: The system will not detect error-ridden locations. The system
will memorize up to bytes 3,000 of data transmitted and received.
● Enable: The system will display error-ridden locations in red. The system
will memorize up to transmitted and received data up to the location where
an error was detected.
Used to switch to another screen when the amount of information to be
displayed is too large to fit on a single screen.
The Communication description which is displayed on screen can be output
to USB memory.
Returns you to the maintenance menu.
2018.07.07 12:45
Com=0
Makeup Ink
Shutdown
Manual
HOME
Prev.Dsp. Next Dsp.
Abort
USB output
Start
Back
Description
: R (Receive)
→ External device : S (Send)
Description