Hitachi UX Twin-Nozzle Technical Manual page 155

(5) Replacing the controlling air filter
Trun off the power.
1
Loosen the knobs (thumb screws) and remove the intake fan cover.
2
Remove the old filter and set the new filter.
(Please set the new filter with red-mark being invisible.)
Set the intake fan cover. (Turn the knobs until the intake fan cover comes into
3
contact with the printer.)
4 Open the Part usage time mgmt. screen (menu 3 of the Circulation control
screen) and set the time of the Controlling air filter R to "0".
7-4 ●Maintenance service
Intake fan cover
Printer
Periodic replacement parts mgmt.
Alarm time
Supply pump １００００
Makeup pump １００００
Circulation pump １００００
Recovery pump1 １００００
Recovery pump2 １００００
０４８００
Controlling air filter L
０００００
Controlling air filter R
Knob (thumb Screw)
Turn the knob (Thumb screws) until comes into contact.
[Stop ]
Com=0
Makeup
Operation time
０１０００
０１０００
０１０００
０１０００
０１０００
０００００
０００００
Air filter
Red-mark inside
2018.07.07 12:45
Ink
HOME
Prev.Dsp. Next Dsp.
Back