Hitachi UX Twin-Nozzle Technical Manual page 55

(7) User pattern character transmission
● This function is used to transmit a user pattern and enter it into the IJ printer.
● A transmitted user pattern can be edited using the "Create user pattern" function, which is provided as
an auxiliary function.
(8) On-line/off-line transmission procedure
● Specifies switch of online state and offline state from external unit to the IJ printer.
(9) Remote operation transmission
● Specifies ink ejection/stop, deflection voltage control (on/off) and error reset from external unit to the
IJ printer.
(10) Time control
● Transmits and sets "current time", "calendar time", etc., from external unit to the IJ printer.
● Inquires current time from external unit to the IJ printer and the IJ printer returns "current time".
(11) Print item deletion transmission
● Specifies print item deletion from external unit to the IJ printer.
● The first print item will be left.
(12) Count Reset Transmission
● This function will change the count value to the preset value (reset value).
● All count blocks which have the preset "Reset" value will be reset to "Reset" value.
(13) Communication buffer
● The print contents received through print content transmission will not be reflected in printing
immediately, but will be temporarily held in buffer.
● The print contents are fetched from the buffer one by one for each printing, and reflected in
subsequent printing.
(14) Ethernet communication (LAN communication TUP-I)
● Function for Ethernet communication between the IJ Printer and external unit employing a LAN
environment.
● Type of Ethernet communication can be selected from Modbus communication.
● Modbus communication require development of a communication program on the external unit side.
For the development purpose of communication program, IJP control library will be provided as a
development kit.
● See the instruction manual for Ethernet Communication TUP-I for details.
5-2 ●Overview