Printings Transmission - Hitachi UX Twin-Nozzle Technical Manual

(9) Any data transmitted by communication (print contents, print specifications, print
format, and user pattern) is not stored except in the following cases.
[Conditions for storing the data]
1
When the ink is stopped after communication by the Shut down key or a stop signal.
2
At 01 minute of every hour.
(10) Transmit to the existing print item after creating a transmission objective print item.

5.3.2 Printings Transmission

5.3.2-1 Text
(1) When printings are to be changed
Item
DLE
number
(2) If deleting character string within print item
Item
DLE
number
(3) When multiple printings are to be designated
Item
DLE
number
(4) When the print contents are changed by specifying the number of the print items
ESC2 Header 7BH
Number of the print
items specified
● Multiple print items can be consecutively transmitted within one session.
● Print items are to be designated by specifying the item numbers. The item numbers need not be sorted
● Print items not transmitted are not changed.
● When "the number of the print items" and the print items are transmitted at a item by
Number-of-the-print-items specifying transmission, the print items beyond "the number of the print
items" will be deleted.
● Number-of-the-print-items specifying transmission shall NOT be made with the other data, such as the
print format or the print specification.
● Both calendar characters and count characters can be transmitted.
● If printings are transmitted for a print item for which Micro QR setup is completed, a communication
error occurs.
●If transmission is made to the item number(s) which does NOT exist, the new item number(s) of the
message will be added, which format type is either ''Individual'' or ''Free layout''.
Printings
Printings
Printings change
Item
DLE
number
Printings change
DLE
Printings erasure
Printings
Item
number
●Transmission Sequences 5-7