Hitachi UX Twin-Nozzle Technical Manual page 123

(
e) When Start/Continue is pressed, refilling of the lines with ink begins.
● After a while, ink is ejected from the nozzle. Check the position of the ink beam.
● To abort the sequence, press Abort and operate in accordance with the operation guidance on the
screen.
After aborting, you are returned to "Circulation control" screen.
● When abort processing was performed, select "Ink refill" from the "Circulation control" screen and
execute.
Display the "Operation management" screen and set the ink operating time to "0".
4
● Refer to "5.2 Monitor operational status" in the Instruction Manual and operate.
●Replacing the ink 6-10