Hitachi UX Twin-Nozzle Technical Manual page 65

5.3.4-2 Message name
(1) message number specified
● A message name is automatically attached when print data is registered.
● Based on the message name displayed in the upper left hand corner of the screen, the last 4 digits are
replaced with the message number and used as the new message name.
(2) Message number and message name specified
● The specified message name attached when print data is registered.
(3) Same message name is used for other message number
● If a message name is in use for other message number, new message name will be created by using
original message name as a base and replacing its 7th and 8th digits with AA to ZZ.
(Example) Message name [ABC] is already registered on No.1. Register on No.2 using identical
(4)Characters available for message name
● Characters used for setting the message name transmission are different from characters used in
manual input on registration screen.
Message name transmission
5.3.4-3 Supplement
● When transmitting print data together with the print contents, send the print contents last.
5.3.4-4 Example of print data registration transmission
(1) Example of registering by specifying message name
02H 1FH
STX ESC2
Header, classification
[Transmission results]
Massage name "ABC" is assigned to current print data and is registered under message number 12.
5-12 ●Transmission Sequences
(Example) Registering for No. 123
Contents displayed in upper left hand corner of the screen
Message name after registration
message name.
Message name of No.1: [ABC
Message name of No.2: [ABC
Function
Manual input
21H 31H 30H
! 1 0
Print data message unmber
AA
Alphameric character/
Symbols
Available
Available
Numbers/symbols (ASCII code): 20H to 5FH, 61H to 7AH
30H 31H 32H 1FH
0 1 2 ESC2
Header, classification
:"ABCDEFGHIJKL"
:"ABCDEFG 0123"
]
]
Accent character/
Arabic character
Available
Unavailable
21H 32H 41H 42H
! 2 A B
Message name
43H 03H
C ETX