Hitachi UX Twin-Nozzle Technical Manual page 135

b Print data
Select the contents and conditions of the characters to be printed.
Print data
Prints using the following test conditions:
・Number of lines
・Character size
・Inter-character space
・Character height
・Character width
・Ink drop use
・Print character description
Confirm that the IJ printer is in the Standby state and press Nozzle test .
3
● The Nozzle property test screen is displayed. The IJ printer enters the Ready to print state.
Nozzle property test
Excitation V-ref.：Nozzle2
c
Excitation V-ref.：Nozzle1
Ref. ambient temperature
Automatic update
d
Incremental change
Print trigger source
Print data
Excitation V-ref. is printed on the print target.
［■■ｎｎ・・・・・・］
Printing starts at the press of [Start printings].
c
Excitation V-ref.
Input the set value you want to print. (Set value is 00 to 19.)
Change the setting using
d
Automatic update
Select whether or not to automatically switch to the next set value after printing one setting.
Disable : Set value does not change.
Dec. : Set value is automatically decremented at each printing.
Inc. : Set value is automatically incremented at each printing.
At "Inc.", the change width by which the value is automatically switched is set.
Data to be displayed
For test
Prints using the currently set print
description and print conditions.
: 1 line
: 12 16 dots
×
: 1
: 99
: 5
: 1/3
:■■nn123ABC
(nn: Excitation V set value)
[Ready ]
(0〜19)
− 09 ＋
(0〜19)
− 09 ＋
23 (℃)
Inc.
(1〜9)
1
Button input Sensor
For test Data to be displayed
or input a value by touching the number.
− ＋
2018.07.07 12:45
Com=0
Makeup Ink
Twin
Abort
Start
printing
●Excitation V adjustment 6-30