Hitachi UX Twin-Nozzle Technical Manual page 129

Press the Ink stream 1 alignment
4
of the stream and clogging of the nozzle have been repaired.
● Perform this operation with the tip of the print head inserted into a beaker.
● When the ink stream is way outside the gutter, cleaning of the nozzle orifice may not be sufficient.
Disassemble and clean the nozzle orifice again.
● When the ink stream position has deviated from the center of the gutter, adjust it in accordance
with par. "6.5 Stream alignment".
→
Start/Continue and confirm that bending
●How to correct ink stream bending and nozzle clogging 6-16