Hitachi UX Twin-Nozzle Technical Manual page 28

Press "Display Item" button.
3
List of display items is then displayed.
Touch screen setup
Display
Keyboard layout
ICON Display
Clock display format
Confirmation window for Manual Control Menu
Arabic input method
Human Machine interface [HMI]
Detail
Display Item
Select the item you want to display.
4
The selected item will be displayed on Print description screen of New HMI screen.
Press Back
5
The screen display [HMI] used by general users can be set to new system screen or conventional
screen.
● When Human Machine Interface [HMI] is set to "New," the general user cannot change perform
maintenance operations such as circulation control.
In the case of these operations, you must login again as the administrator user.
● When Human Machine Interface (HMI) is set to "New", the [New HMI screens] will be displayed at
system boot-up, even when the administrator user is selected as a default login ID.
● The functional limitations set for each general user will still apply on [New HMI screens].
For example, when the general user logs in and when "Edit message" is restricted for him/her,
"Edit message" is prohibited even if Edit message screen is displayed.
● When Human Machine Interface [HMI] is set to "New," if the administrator mode is automatically
canceled while the screen other than the new HMI screen, such as Environment setup screen, etc. is
displayed, Print description screen of New HMI screen will be displayed.
(See "3.3.2 Operating Scheme" in Instruction Manual.)
[Stop ]
OFF in 3 min.
ABC QWERTY
Disable Ink pressure Enable
YYYY.MM.DD
Ink filter replacement
Display Non display
Recovery filter replacement
to the left to the right
Circulation filter replacement
Makeup filter replacement
Air filter replacement
Count reset
Previous New
Ink pressure
.
Back
CAUTION
2018.07.07 12:45
Com=0
Select the item to be
displayed on Print
description screen of
New HMI screen.
Cancel
Back
● Screen indicate interface setup 3-15