Setting The Cross-Point Delay - Sony XVS-G1 User Manual

Changing the source color
Note
The color of the buttons may be different to the color
adjusted using the menu.
After adjusting the color, check the actual color of the
button when it is lit.
1
Open the Home > Setup > Xpt Assign > Src Name/Src
Color > Edit User Color menu (19102.52).
2
Select the target source color (User Color 1 to User
Color 8) to set in [Target].
3
Adjust the color in [Adjust Color].
Color adjustment sliders and the adjusted colors are
displayed in [Adjust Color].
Adjust the color using the [R] (red), [G] (green), and
[B] (blue) sliders while monitoring the color.
To select a preset color
Select a color in [Reset Color].
To return to the previous source color
Press the [Clear] button.
4
Press the [Apply] button.
Setting the Cross-Point
Delay
You can set a delay so that cross-point switching occurs
after a specified delay has elapsed since selecting the
cross-point.
You can use this in combination with the advanced tally
function to output a tally prior to the actual switching of
the cross-point.
For details about advanced tally, see "Setting Advanced
Tally" (page 343).
Notes
• Cross-point delay is enabled only when cross-points are
selected manually.
• Cross-point delay is enabled for re-entry signals if the re-
entry contains an image with cross-point delay set.
When cross-point delay is set for multiple images, the
largest delay value is the one applied.
1
Open the Home > Setup > Xpt Assign > Xpt Delay
menu (19102.61).
The V/K pair number, video signal source name and
number, key signal source name and number, and
cross-point delay setting are displayed.
2
Select the target V/K pair number to set.
To select and set multiple V/K pair numbers, place a
check mark beside the target V/K pair numbers to set.
To select and set all V/K pair numbers, place a check
mark in the Select All checkbox.
3
Set the [Xpt Delay] switch to the on state.
To disable a cross-point delay, set the [Xpt Delay]
switch to the off state.
4
Press the button on the right of the [Xpt Delay] switch
and enter a delay value (0 to 180) in the numeric
keypad window.
The delay setting varies as follows depending on the
system signal format.
2160P, 1080P: Delay by set number of frames
1080i: Delay by set number of fields
304