Executing A Utility Function (Cross-Point Control Block) - Sony XVS-G1 User Manual

Executing a utility function
1
Press the [UTIL/SBOX] button.
The [UTIL/SBOX] button is lit amber and the memory
recall section switches to utility/shotbox operation
mode.
2
Select a bank.
For details about selecting a bank, see "Selecting a
bank" (page 179).
3
Press the button assigned with the target action to
operate.
Executing a Utility Function (Cross-
Point Control Block)
You can operate a utility function in the cross-point button
rows in the cross-point control block.
Press a cross-point button assigned with an action to
execute the utility function.
Note
Action assignments are common to all switcher banks.
Selecting a bank
A group comprising the buttons (24 or 16) in a cross-point
button row are called a "bank."
There are 10 banks (1 to 10), and you select the target
button for operation by assigning a bank to the cross-point
button row.
You can assign a utility/shotbox bank using the following
delegation buttons.
Notes
• You can assign the delegation buttons to use in key bus
mode and free assign mode to the function button
section.
For details, see "Assigning Control Panel Buttons"
(page 317).
• In key/AUX bus delegation mode, you can assign
delegation buttons to the 1st row.
For details, see "Setting the key/AUX bus delegation
mode button row" (page 320).
In key/AUX bus delegation mode:
Press a [UTIL/SBOX1] to [UTIL/SBOX10] button in
the 1st row, turning it on.
The utility functions for the selected bank are assigned
to the 2nd row.
In key bus mode and free assign mode:
Press a delegation button [UTIL/SBOX1] to [UTIL/
SBOX10] in the function button section, turning it on.
The utility functions for the selected bank are assigned
to the 1st row or 2nd row in key bus mode, and to the
1st row to 4th row in free assign mode.
Executing a utility function
This section describes execution in key/AUX bus
delegation mode as an example.
1
Select a bank using the delegation buttons in the 1st
row.
For details about selecting a bank, see "Selecting a
bank" (page 180).
The utility functions for the selected bank are assigned
to the cross-point buttons in the 2nd row.
2
Press the button assigned with the target action to
operate in the 2nd row.
180