Snapshot Operations (Menu); Recalling A Snapshot - Sony XVS-G1 User Manual

Snapshot Operations
(Menu)
A snapshot for a switcher bank region target can be
recalled and saved using the Common > Snapshot menu of
the switcher bank.
A snapshot for a region other than a switcher bank can be
recalled and saved using the [Snapshot] taskbar.
Note
Multiple simultaneous web menu session connections are
supported, but only one of the following pop-up windows
can be displayed at any given time.
Whenever any pop-up window is displayed, the window
previously opened using another menu session is closed.
• [Recall/Store Register] window:
Displayed using the [Recall/Store] button on the [Effect
Timeline Recall/Store] taskbar, [Effect Timeline Edit]
taskbar, or [Snapshot] taskbar
• [Edit Timeline] window:
Displayed using the [All Edit Options] button on the
[Effect Timeline Edit] taskbar
• [Edit Macro Event] window:
Displayed using the [All Edit Options] button in the
[Edit] group in the Home > Register > Macro > Edit
Macro menu (18307.11)

Recalling a Snapshot

Switcher bank region snapshot
The same memory recall buttons as in the memory recall
section of the Flexi Pad control block are displayed in the
Common > Snapshot menu of the switcher bank. The
settings and display of the memory recall buttons in the
Flexi Pad control block and in the menu are linked.
This section describes the M/E-1 menu as an example.
1
Open the Home > M/E-1 > Common > Snapshot menu
(11110.21).
2
Press the [Recall] button in the [Mode] group.
3
Press the [Bank] button and enter a bank number in the
numeric keypad window.
The memory recall section switches to display the
selected bank.
4
Press the button for the target register to recall.
The register button is lit orange and the snapshot is
recalled.
Snapshot for a region other than a
switcher bank
1
Display the [Snapshot] taskbar.
Snapshot recall/store mode is activated.
2
Press the [Recall/Store] button.
The [Recall/Store Register] window appears.
3
Set the button for the target region to the on state.
You can select multiple regions.
For details about the display in the region display
section, see "Region display section" (page 219).
Select a tab to change the region to display.
[ME] tab: Switcher bank regions
[User] tab: User regions
[DME] tab: DME regions
[External Device] tab: External device regions
The first selected region becomes the reference region.
To select all regions configured beforehand
Set the [All Regions] button to the on state.
For details about setting the regions selected
simultaneously, see "Setting Regions Selected
Simultaneously" (page 316).
Note
The region selection is common for snapshots and
effect timelines.
4
Press the [Recall] button.
5
Enter a register number in the numeric keypad area.
For details about selecting a register, see "Selecting a
register" (page 219).
To add the auto transition temporary attribute
Set [Auto Trns] in the numeric keypad area to the on
state.
To add the effect dissolve temporary attribute
Set [Effect Diss] in the numeric keypad area to the on
state.
Note
In the [Recall/Store Register] window, it is not
possible to add the cross-point hold temporary
attribute.
You can use the bus override function and the cross-
point button row cross-point hold function.
For details, see "Cross-Point Hold" (page 50).
218