Processed Key; Dme Effects For Keys - Sony XVS-G1 User Manual

To invert a mask area
Set the [Sub Mask Invert] button to the on state.

Processed Key

* The Processed Key function is not supported
in version 1.0.
A processed key uses DME effects on a key.
This section describes the M/E-1 key 1 menu as an
example.

DME Effects for Keys

DME restrictions
• To use the DME function, the XKS-G1600 GPU Pack
(option) and XZS-G1610 3D DME License (option) are
required.
When the system signal format is 2160P, the DME
function must be enabled for use.
For details about setting GPU functions, see "Setting a
GPU" (page 286).
• The number of DME channels that can be used will vary,
depending on the system signal format and the DME
enhanced function mode setting.
For details, see "DME channels" (page 142).
• In processed keys and DME wipes, only enabled DME
channels on the switcher bank can be used.
For details about setting DME channels, see "Setting a
DME channel to use in a switcher bank" (page 309).
• On keys with resizer enabled, DME effects cannot be
used.
Number of DME channels that can be used
simultaneously
DMEs can be used in up to two locations (processed keys
with DME wipe or image effect) simultaneously on a
single switcher bank.
The number of DME channels that can be used on a key
depends on the DME wipe pattern execution mode and the
image effect function, as given below.
When not using a DME wipe or image effect function:
One DME channel each on two keys, or one to four
DME channels on a single key can be used.
When using a 1-channel mode DME wipe or when using
the image effect function on background A or B:
One DME channel on a single key only can be used.
When using a 2-channel mode or 3-channel mode DME
wipe or when using the image effect function on both
background A and B:
DMEs cannot be used on keys.
Notes
• In multi program 2 mode, DMEs can be used in up to two
locations (main and sub).
86