Key Fill And Key Source; Selecting Signals - Sony XVS-G1 User Manual

Adjusting the foreground color correction
1
Open the Home > M/E-1 > Key1 > Type > Chroma
Adjust menu (11101.12).
2
Set the [FRGD CCR] button to the on state and set the
following parameters.
No. Parameter
1 Video Gain
2 Y Gain
3 C Gain
4 Hue
Adjustment
Video signal gain
Luminance signal gain
Chrominance signal gain
Hue offset amount

Key Fill and Key Source

Selecting Signals

Set the signals to insert in the key fill and key source.
This section describes the M/E-1 key 1 menu as an
example.
Setting a key fill/key source
1
Open the Home > M/E-1 > Key1 > Type > Type Select
menu (11101.11).
2
In the [Key Fill] group, set the key fill signal.
Key Bus: Key 1 bus signal
For details about selecting a signal, see "Selecting a
key fill signal/key source signal" (page 51).
Matte: Color matte
When the [Matte] button is selected, set the following
parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
3
In the [Key Source] group, set the key source signal.
Self: Self mode
Select the same signal as the key fill bus.
Auto Select: Auto Select mode
Select the signal assigned in pair with the key fill
bus signal.
Split: Split mode
Select a different signal than the key fill bus pair
signal.
When the [Split] button is selected, select a key source
signal.
For details about selecting a signal, see "Selecting a
key fill signal/key source signal" (page 51) and
"Selecting a video signal/key signal" (page 51).
Setting a key fill color mix
To mix color 1 and color 2 color mattes
When color matte is selected for a key fill, you can use a
wipe pattern or dedicated pattern to mix color 1 and color
2.
1
Open the Home > M/E-1 > Key1 > Type > Matte
Adjust menu (11101.13).
78
Adjustment
Luminance
Saturation
Hue