Transition Control Block - Sony XVS-G1 User Manual

Transition Control Block

The transition control block is used to execute transitions.
It supports common transitions and independent key
transitions.
AUTO TRANS button
a Transition execution section
Executes a transition.
Name Description
Fader lever Move this up or down to execute a
transition.
Transition Displays the transition progress using
indicator LEDs.
[AUTO TRANS] Executes an auto transition with the set
button transition rate and transition type.
During the transition, the button is lit
amber.
[CUT] button Executes an immediate transition.
b Transition settings section (assignable buttons)
You can assign functions, such as selections and settings,
for transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 317).
Transition indicator
b
a
CUT button
For details, see "Chapter 5 Transitions" (page 53).
Fader lever
a
Next transition selection buttons
Function Button name Description
name
Background BKGD
Key1 to Key8 KEY1 to
KEY8
Key Priority KEY PRIOR
All ALL
Priority Set PRIOR SET
Transition type selection buttons
Function Button name Description
name
Mix MIX
18
d
c
Switches the background
for a next transition.
Inserts or removes the
selected key for a next
transition.
The key is inserted if a key
is currently not inserted, or
removes the key if a key is
currently inserted.
Changes the key priority for
a next transition.
When the [PRIOR SET]
button is lit, the setting for
key priority after the
transition is used.
Selects multiple next
transitions simultaneously.
Sets the key priority.
Selects mix.