Other Settings; Setting A Background; Setting Inversion (Invert); Setting Separate Sides - Sony XVS-G1 User Manual

Other Settings

This section describes the menu for DME channel 1 as an
example.

Setting a Background

You can select a signal to insert into the background of an
image.
1
Open the Home > DME > Channel1 > Input/Output >
Bkgd menu (15101.01).
2
In the [Border Fill] group, select a signal to insert in
the border.
Flat Color: Single color
Ext Video: External input (Ext In) signal
When the [Flat Color] button is selected, set the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue

Setting Inversion (Invert)

You can invert the video signal/key signal of an image
horizontally and vertically.
1
Open the Home > DME > Channel1 > Input/Output >
Video/Key menu (15101.02).
2
In the [Front] group, select the direction of inversion
for the image on the front side.
H Invert: Invert horizontally.
V Invert: Invert vertically.
3
In the [Back] group, select the direction of inversion
for the image on the back side.
H Invert: Invert horizontally.
V Invert: Invert vertically.

Setting Separate Sides

You can insert a different video signal/key signal into the
front and back sides of the image by enabling separate
sides.
Adjustment
Luminance
Saturation
Hue
1
Open the Home > DME > Channel1 > Input/Output >
Video/Key menu (15101.02).
2
Set the [Separate Side] button to the on state.

Removing the Virtual Image

When the perspective of an image is changed, portions
beyond the virtual viewpoint may be displayed wrapped
around on the monitor screen (virtual image). You can
make a setting so the virtual image portions are not
displayed.
1
Open the Home > DME > Channel1 > Input/Output >
Video/Key menu (15101.02).
2
Set the [Wrap Around] button to the on state.
The virtual image portions are removed.

Setting Key Density

You can set the key density.
1
Open the Home > DME > Channel1 > Input/Output >
Video/Key menu (15101.02).
2
Set the [Key Density] button to the on state and set the
following parameter.
No. Parameter
1 Key Density

Setting a Key Source Signal

You can select a key source signal used for the images on
the front and back sides.
1
Open the Home > DME > Channel1 > Input/Output >
Video/Key menu (15101.02).
2
In the [Front Key] group, select a key source signal for
the image on the front side.
Ext Key: Key signal sent from the switcher
Int Key: DME internal key signal
Linear Key: Luminance signal of the input video
signal
When the [Linear Key] button is selected, set the
following parameters.
No. Parameter
1 Clip
159
Adjustment
Key density
Adjustment
Reference level for key signal
generation