Executing A Shotbox; Executing A Shotbox (Flexi Pad Control Block); Executing A Shotbox (Utility Control Block); Executing A Shotbox (Cross-Point Control Block) - Sony XVS-G1 User Manual

Executing a Shotbox

You can execute a shotbox using the Flexi Pad control
block, utility control block, cross-point control block, or
the menu.
On the utility control block and cross-point control block,
use buttons assigned with the shotbox register recall
function.
For details about assigning a function, see "Assigning a
Utility Function" (page 318).
Executing a Shotbox (Flexi Pad
Control Block)
You can recall a shotbox using the Flexi Pad control block
in shotbox operation mode.
1
Press the [SHOTBOX] button.
The memory recall section switches to shotbox
operation mode.
The currently selected bank number and register
number are displayed on the top right button in the
memory recall section.
2
Select a bank.
For details about selecting a bank, see "Selecting a
bank" (page 216).
3
Press the button for the target register to recall.
The register name or register number is displayed in
white characters on buttons with a registered shotbox.
When pressed, the register button is lit orange and the
shotbox is recalled.
When auto run is enabled, the registered effect
timeline is executed at the same time the register is
recalled.
To execute an effect timeline
Press the [RUN] button.
When stopped by a pause, the [RUN] button indication
changes to [PAUSE] button. When you press the [PAUSE]
button, the button indication returns to [RUN] button and
effect timeline execution resumes.
To move to the start point of an effect timeline, press the
[REWIND] button.
Notes
• When auto run is disabled, an effect timeline is not
executed when a shotbox register is recalled. Press the
[RUN] button to execute.
• You can set the operation when the [RUN] button is
pressed again during effect timeline execution.
For details, see "Setting the operation when the [RUN]
button is pressed during effect timeline execution"
(page 328).
Executing a Shotbox (Utility Control
Block)
You can recall a shotbox using the utility control block in
utility/shotbox operation mode.
1
Press the [UTIL/SBOX] button.
The memory recall section switches to utility/shotbox
operation mode.
2
Select a bank.
For details about selecting a bank, see "Selecting a
bank" (page 179).
3
Press the button for the target register to recall.
When a button assigned with a shotbox register is
pressed, the button is lit orange and the shotbox is
recalled.
When auto run is enabled, the registered effect
timeline is executed at the same time the register is
recalled.
To execute an effect timeline
Press the [RUN] button.
When stopped by a pause, the [RUN] button is lit green.
Press the [RUN] button, lighting it amber, to resume effect
timeline execution.
To move to the start point of an effect timeline, press the
[REWIND] button.
Notes
• When auto run is disabled, an effect timeline is not
executed when a shotbox register is recalled. Press the
[RUN] button to execute.
• You can set the operation when the [RUN] button is
pressed again during effect timeline execution.
For details, see "Setting the operation when the [RUN]
button is pressed during effect timeline execution"
(page 328).
Executing a Shotbox (Cross-Point
Control Block)
You can recall a shotbox using a cross-point button row
assigned with a utility/shotbox bank.
234