Setting The Mode Of Buttons In The Cross-Point Control Block; Setting The Mode Of Buttons In The Flexi Pad Control Block - Sony XVS-G1 User Manual

Setting the Mode of Buttons in the
Cross-Point Control Block
Setting the operation mode of the [UTIL]
button in the cross-point control block
1
Open the Home > Setup > Panel > Custom > Operation
Mode menu (19104.61).
2
In the [Util Button] group, select an operation mode.
Hold: Enables utility bus mode only while the [UTIL]
button is pressed.
Lock: Pressing the [UTIL] button switches between
utility bus mode and normal mode each time the
button is pressed.
Setting the operation mode of the [KEY]
button in the cross-point control block
You can set the signal to select on the key source bus.
1
Open the Home > Setup > Panel > Custom > Operation
Mode menu (19104.61).
2
In the [Key Source Bus Select Mode] group, select an
operation mode.
Key: The [KEY] button is always lit and only key
signals can be selected.
Video & Key: Enables key signals or video signals to
be selected using the [KEY] button operation.
Setting the Mode of Buttons in the
Flexi Pad Control Block
Setting the button display in wipe
snapshot operation mode/DME wipe
snapshot operation mode
You can set the memory recall button display in wipe
snapshot operation mode/DME wipe snapshot operation
mode.
1
Open the Home > Setup > Panel > Custom > Flexi Pad
Mode menu (19104.62).
2
In the [Wipe/DME Display] group, select a button
display.
Pattern: Display pattern image.
Register Name: Display register name.
Setting the button display in snapshot
operation mode
You can set the memory recall button display in snapshot
operation mode.
1
Open the Home > Setup > Panel > Custom > Flexi Pad
Mode menu (19104.62).
2
In the [Snapshot Display] group, select a button
display.
Register No.: Display register number.
Register Name: Display register name.
Assigning a register to bottom left button
of bank 0
You can assign a register to the bottom left memory recall
button when bank 0 is selected in snapshot operation
mode/shotbox operation mode/macro operation mode.
1
Open the Home > Setup > Panel > Custom > Flexi Pad
Mode menu (19104.62).
2
Set the [Activate] button in the [Bank 0 Register
Assign] group to the on state.
3
Press the [Register No.] button in the [Bank 0 Register
Assign] group and enter a register number in the
numeric keypad window.
To release the register assignment
Set the [Activate] button in the [Bank 0 Register Assign]
group to the off state.
Switching the operation mode in sync with
the transition control block
You can switch the operation mode of the Flexi Pad
control block in sync with the selection of the [WIPE]
button or [DME] button in the transition control block.
1
Open the Home > Setup > Panel > Custom > Flexi Pad
Mode menu (19104.62).
2
Set the [Wipe/DME Auto Deleg] button to the on state.
To release the link
Set the [Wipe/DME Auto Deleg] button to the off state.
326