Still Image Operations; Creating A Still Image (Freeze); Recalling A Still Image - Sony XVS-G1 User Manual

3
Press the [Name] button and enter a content name (up
to 64 characters) using the keyboard.
4
Select a save destination folder in [Folder].
To create a folder
Press the [New Folder] button, enter a folder name (up
to 32 characters) in the [New Folder] window, and
press [OK].
The folder is created within the selected folder.
Note
The created folder hierarchy can have up to five levels
below the root.
5
Press the [Duration] button and set the video content
duration in the numeric keypad window.
When set to "0", video content recording continues
until the free capacity in frame memory has been
consumed.
6
Select tags to add to content in [Tags].
Place a check mark for each tag to add.
To create a tag
Press the [New Tag] button, enter a tag name (up to 24
characters) in the [New Tag] window, and press [OK].
Note
Up to five tags can be added to content created in
frame memory.
7
Press [OK].
Content name setting
The content name specified in the properties for frame
memory source 1 or 2 is applied to created content using
the following rules.
• The specified content name is applied to the first created
content.
• If a name that does not end in a numeric character is
specified, "1" is appended to the second content name,
and the number increases by 1 for each content.
• If a name ending in a numeric character is specified, that
number is incremented by 1 for each content.
• If content with the same name exists, a copy count
(underscore and copy number) is added to the end.
• If a content name exceeds 64 characters, some characters
preceding the appended number will be deleted.

Still Image Operations

This section describes the operation on frame memory
output channel 1 (FM1) as an example.

Creating a Still Image (Freeze)

You can assign a frame memory source bus signal to a
frame memory output channel and then execute a freeze to
capture still image content and save it in frame memory.
Note
When the system is powered off, the content in frame
memory will be lost. Save any required content in content
storage.
For details, see "Saving content to content storage"
(page 130).
1
Open the Home > Frame Memory > FM1/FM2 > Clip/
Still > Record menu (13101.13).
To enable group mode
Set the [Group Mode] button to the on state.
When group mode is enabled, the frame memory
output channel display changes to [FM1/FM2].
2
Set the [Through] button for [FM1] to the on state.
The frame memory source bus signal is output on the
frame memory output channel.
Note
The output signal of the frame memory output channel
is delayed by one frame.
3
Press the [Freeze] button for [FM1].
The still image content is saved in the folder specified
in the properties for frame memory source 1.
To enable V/K mode
Set the [V/K Mode] button to the on state.

Recalling a Still Image

1
Open the Home > Frame Memory > FM1/FM2 > Clip/
Still > Recall menu (13101.11).
Content can be displayed in list view or thumbnail
view.
131