Assigning Keys To The Independent Key Transition Control Block; (Simple Type) - Sony MVS-6000 User Manual

2
3
4
To return the key delegation button assignment to the factory
default state
In the DSK/FTB Module menu, press [Default].
This returns the key delegation assignment to the factory default state.
Assigning Keys to the Independent Key Transition
Control Block (Simple Type)
It is possible to select the keys that can be used in an independent key transition
control block (simple type) operation.
Note
This operation cannot be done in the CCP-9000/9000A.
The control panel comprises a main base for installing the principal switcher
bank control blocks, and an extension section for extended control blocks. The
independent key transition control block (simple type) can be installed in
either, but the assignable keys differ as follows.
When the independent key transition control block (simple type) is
installed in the main base
Select the keys to be assigned from the following.
• Key1,2 (keys 1 and 2)
• Key3,4 (keys 3 and 4)
• DSK1,2 (downstream keys 1 and 2)
• DSK3,4 (downstream keys 3 and 4)
• N/A (no assignment)
68
Overall Control Panel Settings (Config Menu)
Press the indication (DSK1, DSK2) of the button for the assignment.
The button you pressed changes to reverse video.
Using any of the following methods, select the key to be assigned.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Key No
Press [Set], to confirm the selection.
This assigns the selected key to the key delegation button.
Adjustment
Selection of key assigned to
button
Setting values
1 to 16