Screen Saver And Other Settings (Maintenance Menu); Screen Saver Settings; Adjusting The Brightness - Sony MVS-6000 User Manual

Screen Saver and Other Settings
(Maintenance Menu)
To make settings relating to the screen saver, etc., use the Panel >Maintenance
menu.
• Screen Saver: Make the menu screen saver settings.
• LCD Brightness: Adjust the LCD brightness.
• LED Brightness: Adjust the LED brightness.
• Switch Brightness: Adjust the switch brightness.
• Touch Beep: Select whether or not to sound a beep when a menu operation
• Touch Panel Calibration: Calibrate the touch panel.
• Initial Menu Set: Specify the menu to be displayed at menu startup.
• Mouse Slider Control: Select the mouse button used for adjusting the bar
To display the Maintenance menu
In the Engineering Setup menu, select VF2 'Panel' and HF7 'Maintenance.'
The status area shows a list of the items with their settings.

Screen Saver Settings

To enable the menu screen saver, use the following procedure.
1
2

Adjusting the Brightness

You can adjust each of the following brightnesses independently.
LCD: Adjust the brightness of the source name displays and the LCD buttons
120

Screen Saver and Other Settings (Maintenance Menu)

is carried out.
positions of the knob parameters.
In the Panel >Maintenance menu, press [Screen Saver], turning it on.
Adjust the following parameter.
Knob Parameter
1 Sleep Time
in the Flexi Pad control block.
Adjustment
Time until screen saver starts
operation
Setting values
1 to 300 (minutes)