Configuring System Settings; General System Setup - Honeywell Performance Series User Manual

64 | Performance Series 5 MP Fisheye IP Camera User Guide
Parameter
Disk Full
Record Mode
Record Stream

Configuring System Settings

General System Setup

The general system interface includes the local host setup (including the camera name and GUI
language), and the date/time setup.
General
Parameter
Device Name
Language
Video Standard
www.honeywell.com/security
Table 5-18 Record Control Configurations (cont'd)
Function
Select to Stop Recording or Overwrite the previous files when the
HDD is full.
Overwrite: If the current working HDD is full, then the system will
overwrite the oldest file.
Stop: If the current working HDD is full or is overwriting, the system will
stop recording.
Select Auto, Manual, or Off.
Select to record from the Main Stream or a Sub Stream.
Figure 5-29 General System Configuration Interface
Table 5-19 General System Configurations
Function
Enter the camera's name.
Select a language from the drop-down list.
Select the video standard: NTSC or PAL.