Creating A Video Clip - Honeywell Performance Series User Manual

32 | Performance Series 5 MP Fisheye IP Camera User Guide

Creating a Video Clip

You can clip and save a section of recorded video during video playback using the clip function.
1.
2.
3.
4.
www.honeywell.com/security
Figure 4-8 Clip Function Controls
Note Playback of recorded video is automatically paused during clipping.
Find the recording that you want to create a clip from (see
on page 28).
On the timeline, click the recording at the time you want to start the clip, and then click
. This designates the start time of the clip.
Next, click the recording at the time you want to end the clip, and click
designates the end time of the clip.
Click to save the clipped file to your local PC. To configure the saving path, see
on page 61.
Playing Back Recorded Video
. This
Path