Honeywell Performance Series User Manual page 77

Select a date. If you do not select a date, the current setup will be applied to today only. You
can select All to apply the working period to the whole week.
Click Save to save the changes. The system goes back to the Motion Detection interface. Click
Save to exit.
Figure 6-2 Configuring the Working Period
Configuring the Motion Detection Area
Configure the motion detection region, its sensitivity, and area. The default settings covers the
entire area. You must click Save to enable any changes to these settings.
Figure 6-3 Configuring the Motion Detection Area
Configuring Events and Alarms | 77
800-22756 - B - 04/2017