Honeywell Performance Series User Manual page 45

Table 5-5 Audio Configurations
Parameter Function
Select the check box to enable the main and/or sub audio streams.
Enable
The main stream is enabled by default.
Select the Audio Encode modes for the main and sub streams
from either G.711A or G.711Mu. G.711A is the default setting.
Encode Mode
The Encode Mode setting applies to both the audio output and
bidirectional talk modes.
Sampling The camera supports two settings of sampling frequency: 8K and
Frequency 16K. 8K is the default setting.
The camera supports two settings of AudioIn Type: LineIn and
Mic. LineIn is the default setting.
AudioIn Type
When LineIn is selected, users will need to connect an external
audio input source to the camera. When Mic is selected, the
built-in microphone is used and no external input is required.
Enable the noise filter to filter out background noise from the audio
Noise Filter
stream.
Microphone
Adjust the microphone volume from 0~100.
Volume
Speaker Volume Adjust the speaker volume from 0~100.
Configuring Camera Settings | 45
800-22756 - B - 04/2017