Honeywell Performance Series User Manual page 41
5 mp fisheye ip cameras
Hide thumbs
Also See for Performance Series:
- User manual (276 pages) ,
- Owner's manual (22 pages) ,
- Installation instructions manual (16 pages)
Table of Contents
Advertisement
Parameter
Reference Bit
Stream
Bit Rate
Main Stream
I Frame Interval
Watermark
Enable
Code-stream Type
Encode Mode
Resolution
Frame Rate
Sub Stream
Bit Rate Type
Reference Bit Rate
Bit Rate
I Frame Interval
Table 5-2
Video Stream Configurations (cont'd)
Function
Displays the Reference Bit Rate value according to the resolution and
frame rate that you have selected.
With Bit Rate Type: VBR, the Bit Rate here is the maximum value. In CBR,
the bit rate is a fixed value.
See the Reference Bit Stream for a recommended value.
Set the number of P-frames between I-frames. The value ranges from 25 to
150. The default value is 50.
The recommended value for I Frame Interval is 2 times the frame rate setting.
This function allows you to verify that the video has not been altered. Select
to enable the watermark function, and then type the watermark text. The
default watermark text is DigitalCCTV. The maximum length is 85 digits.
Only numbers, letters, and the underscore character (_) can be used.
Click the check box to enable the secondary stream. This function is
enabled by default.
Select the secondary stream to enable and modify its settings.
General bit stream.
Select from three options for Encode Mode:
H.264 High Profile: High performance profile encoding mode.
H.264 Main Profile: Main profile encoding mode.
MJPEG: Legacy profile encoding mode with high bandwidth.
You can select from multiple resolutions in the drop-down list. The
recommended bit stream value is different for each resolution.
PAL: 1~25 fps; NTSC: 1~30 fps.
Select either VBR (variable bit rate) or CBR (constant bit rate).
Note
You can select the video quality in VBR mode. The value ranges from
1 to 6.
Recommended bit rate value according to the resolution and frame rate you
have set.
With Bit Rate Type: CBR, the bit rate here is the maximum value. In
dynamic video, the system needs a lower frame rate or lower video quality
to adapt to the current bandwidth.
Set the number of P-frames between I-frames. The value ranges from 25 to
150. The default value is 50.
The recommended value for I Frame Interval is 2 times the frame rate setting.
Configuring Camera Settings | 41
800-22756 - B - 04/2017
Advertisement
Table of Contents
