Honeywell Performance Series User Manual page 67

Figure 5-32 Add User Configuration Interface
There are two types of default user groups to add users to:
• admin
• hidden user "default"
The hidden user "default" is for internal system use only and cannot be deleted. When there is
no login user, this hidden user "default" is automatically used for logging in. You can configure
some rights for the hidden user, such as monitoring ability, so that the user can view channels
without logging in.
To add a user, in the Add User configuration interface (see
password, then select a group. Ensure that the general user has fewer rights than the admin
user.
Note User rights cannot exceed the rights of the group to which that user belongs.
Modifying Users: Click
and rights.
Figure 5-33 Modifying User Interface
to modify a user's properties, including their group, password,
Configuring Camera Settings | 67
Figure 5-32), enter a user name and
800-22756 - B - 04/2017