Table of Contents
Advertisement
46 | Performance Series IP Cameras User Guide
Configuring the Live View Window
Video Window Configuration
The video window configuration controls include these icons:
www.honeywell.com/security
Figure 3-11
Live View Window Tool Bar
Table 3-3
Live View Window Tool Bar
SN
Tool
Digital zoom
Snapshot
Triple snap
Record
Help
Figure 3-12
Video Window Configuration Controls
Table 3-4
Video Window Configuration Controls
Icon
Function
Image Control
Original Size
Full Screen
Width and Height Ratio
Adjust Fluency
Function
• When the video is in the original state, click
and hold down the left mouse button
on Live video to zoom in on a specific area.
Right-click the mouse to restore previous
view.
• Click
, then use the middle mouse
button to zoom in/out on the live video.
Click to take a snapshot of an important scene.
The snapshot is saved to \picture download
(default). Snapshots are saved in JPEG format.
See
Path on page 57
for information about
configuring where snapshots are saved.
To change the default save path, go to
Setup>Camera>Video>Path.
Click, and the camera snaps at 1 f/s. All images
are saved to Setup>Camera>Video>Path.
Click to start manual recording. All video is
recorded in Setup>Camera>Video>Path.
Click to open the Help file.
Advertisement
Table of Contents
