Destination - Honeywell Performance Series User Manual

Destination

Path
On the Path tab, you can assign where recorded video files or snapshots will be saved.
Depending on your camera model, you can save recorded video or snapshots to a Micro SD
card, an FTP server, and/or an NAS disk.
You can also set up the system to save recorded video and snapshots files according to event
type (Scheduled, Motion Detect, Alarm), corresponding to the three record modes in the
Schedule Interface (General, Motion, Alarm).
Parameter
Event Type
Local
FTP
NAS
Local
On the Local tab, you can view local Micro SD card disk information (such as capacity). You can
also access the Read Only, Read & Write, Hot Swap, and Format functions.
Figure 5-24 Path Configuration Interface
Table 5-15 Path Configurations
Function
Select Scheduled, Motion Detect, or Alarm.
Select to saves files to the Micro SD card
Select to save files to the FTP server.
Select to save files to the NAS disk.
Figure 5-25 Local Storage Configuration Interface
Configuring Camera Settings | 61
800-22756 - B - 04/2017