Record Control - Honeywell Performance Series User Manual

Parameter
Enable
Server Address
Remote Directory

Record Control

Parameter
Pack Duration
Pre-event Record
Figure 5-27 NAS Configuration Interface
Table 5-17 NAS Configurations
Function
Check this box to enable the NAS option.
Set the IP address of the NAS server.
Set storage directory where recorded video and snapshots will be
stored.
Figure 5-28 Record Control Configuration Interface
Table 5-18 Record Control Configurations
Function
Select the file size. The default is 8 minutes.
Enter a pre-record value. The number of seconds to be recorded before
the event trigger.
For example, the system can record the four seconds of video in the
buffer. Recording begins up to five seconds before the event trigger.
Configuring Camera Settings | 63
800-22756 - B - 04/2017