Honeywell Performance Series User Manual page 62

62 | Performance Series 5 MP Fisheye IP Camera User Guide
FTP
On the FTP tab, you can enable the FTP storage function. When enabled, event-triggered video
and snapshots (either scheduled or motion detection, depending on what you chose in
page
Parameter
Enable
Server Address
Port
User Name
Password
Remote Directory
Emergency (Local)
NAS
On the NAS tab, you can enable the NAS storage function. When enabled, event-triggered video
and snapshots (either scheduled or motion detection, depending on what you chose in
page
www.honeywell.com/security
61) will be saved to the specified FTP server.
Figure 5-26 FTP Configuration Interface
Table 5-16 FTP Configurations
Function
Check this box to enable the FTP option.
Set the IP address of the FTP server.
The default setting is 21. You can modify this setting as necessary.
Enter the server user name.
Enter the server password.
Set storage directory where recorded video and snapshots will be
stored.
Enable Emergency (Local) to save to the local Micro SD card when the
network connection to FTP is unavailable.
61) will be saved to the specified NAS server.
Path on
Path on