Table of Contents
Advertisement
Chapter 2
Name of parts and contents
2.1 Name of parts and contents
2 RUN LED
1 POWER LED
○
7 LCD display
5 REMOTE LED
○
6 KEY ENABLED
LED
○
No.
Name of parts
1
POWER LED
2
RUN LED
3
WARNING LED
4
ALARM LED
5
OPE LED
6
KEY ENABLED LED
7
LCD display
8
Operation key
9
Connector
10
Hole for installation
Battery exchange
11
cover
fixation screw
(NOTE1) Because the first battery is for operation check, it may become the life immediately.
Chapter 2 Name of parts and functions of WOP
○
○
○
REMOTE OPERATOR
（M3 Depth3.5mm）
Tab. 2 Name of parts and contents
Color
Green
Light on when power is supplied to the operator.
Green
Light on when the Inverter is running.
Red
Light on when parameter setting is incorrect.
Red
Light on when the Inverter trips.
Light on when the REMOTE key makes the compulsion
operation function effective. It doesn't light when the compulsion
Green
operation function is effective by input terminal OPE. (Press the
key more than 2s)
Green
Light on only when operation command is set in operator.
Refer to section 2.4 for details.
Refer to Tab. 3 for details.
It can be connected to the main body of the Inverter via a cable (optional).
It is the hole for installation on the control panel. Please fix with M3 screw.
Please unscrew this one and detach the cover for replacing the battery.
(NOTE1) (Refer to section 9.3 for more details)
3 WARNING LED
4 ALARM LED
10 Hole for
installation
8 Operation key
Contents
3
9 Connector (RJ45)
11 Battery exchange cover
fixation screw M2×8mm
Advertisement
Table of Contents
