Chapter 4 Operation; Changing Display Mode - Hitachi REMOTE OPERATOR WOP Instruction Manual

Chapter 4 Operation

4.1 Changing display mode

When connecting to WJ200 (Ver.2.0 or above) or NE-S1, WOP has four display modes which
can be changed from one to another via pressing the [] or [] key at Navigation level.
Moreover, there are 3 other modes: Read mode, Write mode and Option mode. In any display
mode, it moves to Read mode or Write mode via pressing [READ] key or [WRITE] key and
moves to Option mode after pressing [], [] and [] at the same time. It returns to display
modes via pressing [ESC] key.
Each mode has its own layers, display contents and parameter settings cannot be changed at
Navigation layer while they can be changed at Edit layer. (Please see figure below.)
When pressing [SET] key at Navigation layer, a cursor will appear and screen will move to
below layer.
Monitor
mode A
ESC
Monitor or function
code selection
Monitor
mode A
ESC
Change parameter
settings
Monitor
mode A

Monitor
mode B

SET SET
ESC
Monitor row
selection
Monitor
mode B
SET
ESC
SET
Monitor item
selection
Monitor
mode B
READ
ESC
Parameter
Read
Fig. 5 Outline of mode transition
 
Function
mode
 
SET
ESC
ESC
Function code
selection
Function
mode
SET
ESC
Change parameter
settings
Function
mode
WRITE
ESC
Parameter
Write
10
Chapter 4 Operation

Trip mode

SET
Trip history
monitor
Trip mode

 
ESC
Option
mode


Setting item selection
Option
mode
ESC SET
Change operator
settings
Option
mode
Press at the
same time