R/W Storage Mode: Single ・ Write Function - Hitachi REMOTE OPERATOR WOP Instruction Manual

5.2 R/W Storage Mode: Single ・ WRITE function
After pressing the [WRITE] key in any display mode except Read mode and Option mode, the
parameter settings stored in WOP are transferred to the inverter. EzSQ program is transferred
to the inverter automatically after parameter copy is finished if the Inverter supports EzSQ
function. It returns to previous display after write is completed.
The Inverter without EzSQ function
MONITOR-A M1-STOP ALL
d001 Output FQ
0.00Hz
F001 0.00Hz
The Inverter with EzSQ function
MONITOR-A M1-STOP ALL
d001 Output FQ
0.00Hz
F001 0.00Hz
WRITE
WRITE
Chapter 5 Read, Write function and operation
WRITE
WRITE
Data writing...
please keep power ON!
When parameter write is completed, it will
return to previous display automatically.
When write is completed, it will return
to previous display automatically.
Parameter writing
Data writing...
OPE -> INV
please keep power ON!
Parameter writing
OPE -> INV
EzSQ writing
WRITE
EzSQ writing...
OPE -> INV
please keep power ON!
21
Write "completed" will
display for 2 seconds
WRITE
Completed
Write "completed" will
display for 2 seconds
WRITE
Completed