R/W Storage Mode: Single ・ Read Function - Hitachi REMOTE OPERATOR WOP Instruction Manual

5.1 R/W Storage Mode: Single ・ READ function
When the R/W Storage Mode is selected to [01: Single], the parameter Read or Write is
executed immediately after pressing [READ] or [WRITE] key. It is convenient to write the
parameters into numerous inverters (the same type) continuously.
After pressing the [READ] key in any display mode (except Write mode and Option mode),
the parameter settings of the inverter are read and saved into WOP. EzSQ program read is
transferred to WOP automatically after parameter reading is finished. If the inverter supports
EzSQ function, it returns to previous display after read is completed.
Please note that the data saved in WOP will be overwritten.
The Inverter without EzSQ function
MONITOR-A M1-STOP ALL
d001 Output FQ
0.00Hz
F001 0.00Hz
The Inverter with EzSQ function
MONITOR-A M1-STOP ALL
d001 Output FQ
0.00Hz
F001 0.00Hz
READ
READ
please keep power ON!
(NOTE) All inverter parameters saved in WOP are overwritten after pressing the [READ] key.
Chapter 5 Read, Write function and operation
READ
READ
Data reading...
please keep power ON!
When parameter read is completed, it will
return to previous display automatically.
When read is completed, it will return
to previous display automatically.
Parameter reading
Data reading...
OPE <- INV
Parameter reading
OPE <- INV
EzSQ reading
READ
EzSQ reading...
OPE <- INV
please keep power ON!
20
Read "completed" will
display for 2 seconds
READ
Completed
Read "completed" will
display for 2 seconds
READ
Completed