Lcd Display - Hitachi REMOTE OPERATOR WOP Instruction Manual

2.4 LCD display

In the case of connecting to WJ200 (Ver.2.00 or above) or NE-S1, the status and color of
LCD backlight and the details of LCD display are described as follow.
Backlight
When connecting to WJ200 (Ver.2.0 or above) or NE-S1, there are two kinds of backlight
colors of LCD display, white and orange, and the state of the inverter is displayed by different
colors as described in Tab. 4.
Backlight Color
White
Orange
White ⇔ Orange
(Alternate blinking for one
second)
The details of LCD display
When connecting to WJ200 (Ver.2.0 or above) or NE-S1, the first line of LCD monitor always
displays the display mode, the number of the control object, the state of the inverter, and the
display selection. (Refer to Fig. 2 and Tab. 5)
Display mode
MONITOR-B
Output FQ
Output current
Input
Output
Chapter 2 Name of parts and functions of WOP
Tab. 4 Backlight colors of LCD display
Normal (It is not related to inverter's driving/stop)
Warning (Parameter mismatch)
Trip (The same as ALARM LED)
The number for
the control
M1 - STOP
Fig. 2 LCD display
Contents
The state of
the inverter
ALL
0.00Hz
0.00A
LLLLLLLL
LLL
6
The display
selection