R/W Storage Mode: Quad ・ Verify Function - Hitachi REMOTE OPERATOR WOP Instruction Manual

5.4 R/W Storage Mode: Quad ・ VERIFY function
In any display mode except Write mode and Option mode,
the read screen is displayed after pressing the [READ] key.
Use the [] or [] key to move the cursor up and down to
select the data number to be verified.
When memory number No.1 is selected, it moves to the
below layer after pressing the [SET] key. There are five
selections described as below, where item 03 and item 04 are
selected to verify data and EzSQ.
01:Read data
02:Read data+EzSQ
03:Verify data
04:Verify EzSQ
05:Cancel
The result is shown
automatically after the
parameter or EzSQ
verification is completed.
It returns to navigation level of Read mode after the
[ESC] is pressed.
Chapter 5 Read, Write function and operation
It will displayed when select "04"
and the EzSQ be verified.
READ
EzSQ verifying...
OPE -> <- INV
please keep power ON!
Transform
automatically
READ
EzSQ matched
Press [ESC] key
24
READ
1.100718 14:50 INV81
E.------ --:-- -----
E.------ --:-- -----
E.------ --:-- -----
SET
ESC
READ
Data No.1
Select data
03: Verify data
SET
ESC
when select [03: Verify data]
READ
Data verifying...
OPE -> <- INV
please keep power ON!
Transform
automatically
READ
Data matched
Press [ESC] key
ESC
READ
1.100718 14:50 INV81
E.------ --:-- -----
E.------ --:-- -----
E.------ --:-- -----