Operation Of Monitor Mode B - Hitachi REMOTE OPERATOR WOP Instruction Manual

4.3 Operation of Monitor mode B

1. Please select monitor mode B via pressing the [] or []
key at navigation layer. The cursor will not appear at this
layer until pressing the [SET] key.
2. After pressing the [SET] key at navigation layer, it moves
to edit layer and the cursor appears at the first row of the
monitor item. Use the [] or [] key to select the row of
monitor item.
3. It entries into the below layer after pressing the [SET] key
and the cursor appears at the function code of the item.
Pressing the [] or [] key to select the code. After
pressing the [SET] key, the monitor item is selected, and it
returns to the upper layer. After pressing [ESC] key, the
change is cancelled and returns to the previous display.
Chapter 4 Operation
MONITOR-B
Output FQ
Output current
Input
Output
MONITOR-B
Output FQ
Output current
Input
Output
SET
MONITOR-B
d001
13
M1-STOP ALL
0.00Hz
0.00A
LLLLLLLL
LLL
SET
ESC
M1-STOP ALL
0.00Hz
0.00A
LLLLLLLL
LLL
SET
ESC
M1-STOP ALL
Output FQ