R/W Storage Mode: Quad ・ Write Function - Hitachi REMOTE OPERATOR WOP Instruction Manual

5.5 R/W Storage Mode: Quad ・ WRITE function
In any display mode except READ mode and Option mode,
the write screen is displayed after pressing the [WRITE] key .
Use the [] or [] key to move the cursor up and down to
select the data number to be written.
After pressing the [SET] key, 3 selection items is displayed
as described follows.
01: Write data
02: Write data+EzSQ
03: Cancel
Note: only two items 01 and 03 are displayed when memory
No.2, No.3 or No.4 is selected.
The parameters are written after
the [SET] key is pressed.The display
of data is shown as described in the
right figture.
After the parameter writing is completed, it returns to
navigation level of the write mode automatically.
Chapter 5 Read, Write function and operation
It will be displayed when item
"02" is selected.
WRITE
EzSQ writing...
OPE -> INV
please keep power ON!
25
WRITE
1.100718 14:50 INV81
E.------ --:-- -----
E.------ --:-- -----
E.------ --:-- -------
SET
ESC
WRITE
Data No.1
Select data
01: Write data
SET
ESC
WRITE
Data writing...
OPE -> INV
please keep power ON!
Transform
automatically
WRITE
Completed
Transform
automatically
WRITE
1.100718 14:50 INV81
E.------ --:-- -----
E.------ --:-- -----
E.------ --:-- -------