Slot Requirements For General Ethernet And Fte Node Setup - Honeywell T320 Planning, Installation And Service Manual

Slot number
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
NOTE
A Local Control Network Processor (LCNP) board and LCN Media Access Unit (MAU) are no
longer used if the Server has been upgraded to be an ELCN node.
5.5.2

Slot requirements for General Ethernet and FTE node setup

The following table identifies the specific slots for each of the Honeywell options for general Ethernet
and FTE node configurations.
Configuration
FTE Supervisory (Default)
1 NIC, Standard Ethernet
through one on-board NIC
2 NICs, Standard Ethernet
Description
PCIe_G2x1
PCIe_G3 x16 _CPU1
PCIe_G3x4_CPU1
PCIe_G3x16_CPU2
PCIe_G3x4_CPU1
PCIE-
x 4
Free
Slot
Free
Slot
Free
Option
-
LCNP4e/LCNP4e2
-
Not Populated
Empty for MZ-PCSV71
PERC H310 Controller for MZ-PCSV72
PERC H710 Controller for MZ-PCSV73
PCIE- PCIE- PCIE-
x 8 x 8 x 4
Free Free Free
Slot Slot Slot
Free Free Free
Slot Slot Slot
Free Free Free
- 55 -
Chapter 5 - Servicing
PCIE-x 4
Empty for MZ-
l
PCSV71
PERC H310
l
Controller for MZ-
PCSV72
PERC H710
l
Controller for MZ-
PCSV73
Empty for MZ-
l
PCSV71
PERC H310
l
Controller for MZ-
PCSV72
PERC H710
l
Controller for MZ-
PCSV73
Empty for MZ-
l