Lcn Node Slot Requirements; Experion Nodes Slot Requirement; Default Configurations For Fte; Fte Supervisory (Default) - Honeywell T320 Planning, Installation And Service Manual

Table of Contents

Advertisement

Chapter 2 - Planning
2.4

LCN node slot requirements

Slot number
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
NOTE
A Local Control Network Processor (LCNP) board and LCN Media Access Unit (MAU) are no
longer used if the Server has been upgraded to be an ELCN node.
2.5

Experion nodes slot requirement

2.5.1

Default configurations for FTE

Broadcom on-board NICs are enabled without PXE.
l
If you are using FTE slot only, then use on-board NICs.
l

FTE supervisory (Default)

l
Cnet configuration using PCIC interface
l
2.5.2
FTE supervisory (Default)
FTE must be configured on on-board NIC.
Description
PCIe_G2x4
PCIe_G2x1
PCIe_G3 x16 _CPU1
PCIe_G3x4_CPU1
PCIe_G3x16_CPU2
PCIe_G3x4_CPU1
Option
-
-
LCNP4e/LCNP4e2
-
Not Populated
Empty for MZ-PCSV71
PERC H310 Controller for MZ-PCSV72
PERC H710 Controller for MZ-PCSV73
- 17 -

Advertisement

Table of Contents
loading

Table of Contents