Honeywell T320 Planning, Installation And Service Manual page 79

Boot settings
Boot Mode
Boot Sequence Retry
Boot sequence
1. Embedded SATA Port Optical Drive E
2. Hard Drive C:
3. Embedded NIC | Port 1 | Partition 1 | Partition 1 : BRCM MBA Slot 0100 V15.2.10
Boot option Enable / Disable
1. Hard drive C
2. Embedded SATA Port Optical Drive E
3. Embedded NIC | Port 1 | Partition 1 | Partition 1 : BRCM MBA Slot 0100 V15.2.10
Hard disk drive sequence
RAID Controller in Slot 6 NA
One time boot
Column 1 heading
One time Boot Device List
BIOS Boot Sequence Device
BIOS Hard Disk Drive Sequence Device
UFFI Boot Sequence Device
BIOS
Disabled
Column 2 heading
Disabled
Hard drive C:
RAID Controller
Embedded NIC
- 79 -
Chapter 5 - Servicing