Table of Contents
Advertisement
WARNING
Use a grounding strap and grounded work surfaces and equipment when handling any electro
statically sensitive components such as the video cards, NIC adapter cards, and SCSI controller
cards. Store and transport parts only in electro statically safe containers.
LCN node setup board configuration
l
Slot requirements for general Ethernet and FTE node setup
l
Add additional memory
l
Verifying correct BIOS settings
l
BIOS settings for 51155539-100
l
BIOS settings for 51155539-200
l
5.5.1
LCN node setup board configuration
Slot number
Slot-1
Slot-2
5.5.2
Slot requirements for general Ethernet and FTE node setup
The following table identifies the specific slots for each of the Honeywell options for general Ethernet
and FTE node configurations. Four Ethernet 10/100/1000 embedded Base-T connections are standard
on the Honeywell-based HP ProLiant DL360p Gen 8 Server Platform. The Broadcom dual embedded
GB NICs are enabled without PXE in the System BIOS.
The default configurations listed are for FTE connectivity through the on-board NICs. The following
charts defines the two FTE configuration and general Ethernet configurations.
360P
Broadcom Dual
Onboard NIC
5.5.3
Add additional memory
Prerequisites
Turn off the system
l
Disconnecting power cords and cables from the server.
l
Description
-
LCNP4e/LCNp4e2
FTE Only
Use Onboard NICs
(NIC1 & NIC2)
- 48 -
Chapter 5 - Servicing
No FTE, but 1 or 2 Ethernet ports
Use one or two Onboard NICs
(NIC1 or NIC2)
Advertisement
Table of Contents
