Servicing Honeywell Options; Slot Requirements For General Ethernet And Fte Node Setup - Honeywell MZ-PCSV74 Planning, Installation And Service Manual

Publication
5.3

Servicing Honeywell options

CAUTION
Do not damage the EMI gasket fingers when removing/installing boards.
WARNING
Use a grounding strap and grounded work surfaces and equipment when handling any electro
statically sensitive components such as the video cards, NIC adapter cards, and SCSI controller
cards. Store and transport parts only in electro statically safe containers.

Slot requirements for General Ethernet and FTE node setup

l
5.3.1 Slot requirements for General Ethernet and FTE node setup
The following table identifies the specific slots for each of the Honeywell options for general Ethernet
and FTE node configurations.
Configuration
FTE Supervisory (Default)
1 NIC, Standard Ethernet through
one on-board NIC
2 NICs, Standard Ethernet
through two on-board NICs
Contains information about...
Troubleshooting Your System
Installing System Options
Installing Drives
Getting Help
Jumpers, Switches, and Connectors
I/OPorts and Connectors
Abbreviations and Acronyms
PCIe x 8 PCIe_G3 x
CPU 16 CPU
Free Free Slot
Slot
Free Free Slot
Slot
Free Free Slot
Slot
- 35 -
Chapter 5 - Servicing
PCIe_G3 x PCIe_G3 x
1 PCH 8 PCH
Free Slot Free Slot
Free Slot Free Slot
Free Slot Free Slot