Troubleshooting - AEG BSK892330M User Manual

52 www.aeg.com
11.10 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1
Step 2
Step 3
Step 4
Side lamp
Step 1
Step 2
Step 3

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
Before you replace the lamp:
Step 1
Turn the glass cover to remove
it.
Remove the metal ring and clean the glass cover.
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Attach the metal ring to the glass cover and install it.
Remove the left shelf support
to get access to the lamp.
Use a Torx 20 screwdriver to
remove the cover.
Remove and clean the metal
frame and the seal.
Step 2
Disconnect the oven from
the mains.
Step 4
Step 5
Step 6
Step 3
Put a cloth on the bottom of
the cavity.
Replace the lamp with a suita‐
ble 300 °C heat-resistant
lamp.
Install the metal frame and the
seal. Tighten the screws.
Install the left shelf support.