AEG BSK892330M User Manual page 49

Step 5 Reassemble the water drawer.
Step 6 Snap in the wave-breaker. Push it
into the drawer body.
Step 7 Assemble the lid. First insert the
front snap and then push it
against the drawer body.
Step 8 Insert the water drawer.
Step 9 Push the water drawer towards
the oven until it latches.
11.6 How to use: Descaling
Turn off the oven and wait
until it is cold.
Duration of the first part: around 100 min
Step 1 Place the deep pan on the first shelf position.
Step 2 Pour 250 ml of the descaling agent in the water drawer.
Step 3 Fill the remaining part of the water drawer with water to the maximum level.
Step 4 Select: Menu / Cleaning.
Step 5 Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6 After the first part is over, empty the deep pan and put it back on the first shelf
position.
Duration of the second part: around 35 min
Step 7 Fill the water drawer with water. Make sure there is no remaining descaling
agent inside the water drawer. Insert the water drawer.
Step 8 When the function ends, remove the deep pan.
When this function works, the lamp is off.
Turn off the oven.
M
A
X
Before you start:
Remove all accessories.
When descaling ends:
When the oven is cold, dry
the cavity with a soft cloth.
Remove the remaining water
from the water drawer.
ENGLISH
M
A
X
Make sure that the water draw‐
er is empty.
Leave the oven door open
and wait until the cavity is
dry.
49