Cisco 7800 Series Administration Manual page 316

Unit
Parameter
BXfer On Speed Dial Enable
BXfer To Remote Party Number Enable
BLF Label Display Mode
Unit
Enter the programming information for each line key for the Attendant Console unit.
Parameter
Unit Enable
Unit Online
HW Version
SW Version
TR-069
TR-069
Parameter
Enable TR-069
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
302
Description
When set to Yes, the phone performs a blind transfer
when the speed dial function key is selected. When
set to no, the current connected call is held and a new
call to the speed dial destination is started.
For example, when a user parks a call using the speed
dial function, if the parameter is enabled, a blind
transfer is performed to the parking lot. If the
parameter is not enabled, an attended transfer is
performed to the parking lot.
Default: No
When set to Yes, the phone performs a blind transfer
to a remote number. When set to no, blind transfer to
remote number is disabled.
Options to select a mode which displays on the phone
screen for BLF.
Default: Blank
Description
Indicates whether the key expansion module that is
added to the phone is enabled.
Indicates whether the key expansion module that is
added to the phone is active.
Displays the hardware version of the key expansion
module that is added to the phone..
Displays the software version of the key expansion
module that is added to the phone.
Description
Settings that enables or disables the TR-069 function.
Default: Disabled
Cisco IP Phone Troubleshooting